|
Features
of EBD Pressure Filters
The EBD Water pressure filters are selected and
designed to meet specific process
requirements.
The GRP filter vessels are manufactured from
high quality materials manufactured under strict
quality control procedures. The steel vessels
are fabricated according to the latest ASME code
and undergo tedious inspection and testing
procedures prior to their release.
The internal linings are carefully selected to
be compatible with the characteristics of the
water and impurities to provide years of
trouble-free operation.
The internal distributor is designed to assure
uniform flow within the media. The underdrain
collectors are the header and lateral type,
with proven effectiveness in the field
during many years of operation.
There is also a wide selection of face pipework
materials, such as PVC, uPVC, GRP,
Polypropylene, Galvanized or Black Iron, and
lined steel, depending on the characteristics of
the liquid being filtered. Typical valves
materials used are cast iron, steel, GRP, PVC.
The filter backwashing can be initiated manually
or automatically. Automatic backwashing
can be initiated by timer, pressure switch,
flowmeter or any external signal. The
backwashing sequence is controlled by an
electro-mechanical timer with relays or
programmable logic controller. The controller
can also be connected to a PC based monitoring
and control system.
Most of the EBD Water pressure filters are
delivered to the site pre-piped complete with
the valves and face piping, ready
for site connection to water, drain and
electrical lines. Larger filters are delivered
in semi-knock down condition to minimize site
work and installation procedures.
|
